Hello friends good night, I have a fridge Haceb assento no Frost, (I don't know how many feet it is but it measures about 1 meter with 80 centimeters), which I stop freezing only cools a little in the frizzer, I removed the lid of this and after checking the fan, the timmers, the resistance, voltages on the connectors, condenser fan, bimetallic and a thermal that is like a resistor all this is in good condition, what I could verify when I connect it to the outlet is that only freezes a part of the bone coil about 50 centimeters and no longer frost on the rest of the coil, the coil is made of aluminum and another thing I could verify is that the amps in the compressor motor ranges from 0.5 to 0.8 amps does not reach an amps and I think that consumption is very low, since I have seen other refrigerators with the same characteristics and they show me readings of 1.5 to 2 amps, thanks for your collaboration if you tell me that I should have done Since before thinking that it is the motor-compressor unit, it is suddenly the capillary, thanks again for the help you can give me.

Place a service valve in principle to check the gas load, if you do not have it, you can use a puncture valve to not cut the pipe at the moment, according to your information you have a leak or lack of gas ...