Dear, Community consultation. because I don't know how to solve a bug. I have a Whirlpool wrm51p1 refrigerator that fails after the freezer door is closed for 12 hours The engine starts and works perfectly (+ 2hs as normal consumption) if the equipment remained without starting for 10/15 min. But the fault is making it when there are power outages (summer + Epec = cuts all the time) If, when the engine is running, the power supply is cut off and it returns immediately, the starter relay starts to calibrate and the consumption trips at about 3.5 Ampers, which causes the thermal protector to jump. The board had 2 doubtful electrolytic capacitors, but everything remains the same after its replacement. One person told me that the plate should not try to start the engine as soon as the service is restored because the motor coils are still loaded and that I should wait for about 10min, but that is commanded by the plate's micro and I do not understand why this fault is just now ? The relay seems to be fine Fridge: wrm51p1 series JA1819527 relay: Embraco 21351-6442 Engine: Embraco Eg 100HLR plate: 07932-24