⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

refrigerator BOSCH 360 ECOPLUSH

silvia rivas
hace 5 años
hace 5 años
HOLA.LA FRIDGE COOLED XQ DID NOT GAS: GOT CARGE YEAR AGAIN AND A HALF APPROX .. IN THE PRESENT IT REMAINED REMAINING WITHOUT GAS .EVIDENTLY X A SMALL LEAK. IN THE HURRY THE FRIDGE WEAR R134a, and I placed R12, I realized because the pressure with stopped engine was 40 PSI and its working pressure of 6 PSI. This will complicate its operation, after 2 days approx has achieved a temperature of 8 degrees in the cabinet
gustavo gabrieltecnico
hace 5 años
hace 5 años
Hello Silvia, put the R-134a, because it is the one that carries, because over time the motor compressor is going to burn, the oil is not compatible with that coolant, greetings.
silvia rivas
hace 5 años

hello, thanks x answer: to return to 134a, you should take out all the gas you have at the moment, right. The oil you have now is MINERAL ??? THERE IS NO CHANGE ALSO THE OIL ?? NO IT HAS BEEN CONTAMINATED

Responder
Fermin 007
Fermin 007
57.307
hace 5 años
hace 5 años
A compressor of R134 can load it with R 12 or MP39, there is no problem, if it were the other way around, that is to say R 12 and you put R 134a then if it is contaminated, now, you had to do cleaning, blow, filter change , drain the oil, empty, because of the small leak, since moisture enters the system, in short, if you did everything right the service, with R 12 works well, greetings
gustavo gabrieltecnico
hace 5 años

hello silvia, it's okay what colleague fermin says (greetings) the conversion is the other way around if you can have short-term ploblems, greetings.

Responder
silvia rivas
hace 5 años

bn day .. thank you very much for the answer, I appreciate the attention to both

Responder
rubensiño
rubensiño
22.830
hace 5 años
hace 5 años
The r12 works with any oil leaves working there will be no problem luck
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis