⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

My fkg 371 refrigerator does not work

Matias Alejandro
hace 6 años
hace 6 años
I have a refrigerator display and does not cool, so I observe not dragging the compressor. It has energy, inside it works the fan that distributes the cold but does not cool. It is a display refrigerator, model fkg 371
omorma
omorma
15.708
hace 6 años
hace 6 años
Hello, how are you? The problem can be the thermostat, you can bypass the contacts of the thermostat or start the engine directly if you bypass the thermostat should start if the problem is this and if you start the compressor directly and it succeeds you also change the thermostat, look where is the bulb of the thermostat to locate it in the same way and take a picture of the connections to not confuse you take the thermostat to the spare house to give you the same greetings.
Matias Alejandro
hace 6 años

Is it easy to bypass the thermostat?

Responder
omorma
omorma
15.708
hace 6 años

Yes input and output cable

Responder
Matias Alejandro
hace 6 años

Yes, but there are 4 wires, of which one is earth. As I do?

Responder
omorma
omorma
15.708
hace 6 años

Obviously the ground one, the common one that comes from the compressor with which it enters the line

Responder
Matias Alejandro
hace 6 años

Thank you. I can get the circuit somewhere. Taking out the earth. The thermostat has 3 legs with the numbers 3,6 and 4. So I know which are the common and the line. Thanks again.

Responder
omorma
omorma
15.708
hace 6 años

You only have to make a bridge between 2 the rest does not matter, you look at the cable that comes from the plug where it is connected and then you look at the cable that comes out of the compressor to the thermostat those two you have to bridge

Responder
BELTRAN68
BELTRAN68
26.476
hace 6 años
hace 6 años
Hi, matías, how are you? I hope well pay attention to what is indicated by omorma, if the compressor does not start when bridging then it may be the broken ptc relay changing it would solve the problem and if it has a 12 or 15 uF gear capacitor it could be broken (domed and you can change it), go check those 3. thermostat ptc relay march capacitor regards
Matias Alejandro
hace 6 años

Ready to bridge the thermostat and start the compressor. So the problem is that. It is easy to change is a display refrigerator and is up.

Responder
BELTRAN68
BELTRAN68
26.476
hace 6 años

IF IT IS EASY TO CHANGE THERMOSTAT MATIAS REPLACES ONE TO ONE OF THE 2 CABLES AND READY

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis