adrianbu

18

hace 6 años

Defrosting makes it perfect, it has no ice block. just frost on the refrigerator air duct and condense a few drops of water on the roof of the refrigerator

adrianbu

18

hace 6 años

Hello friends, already with the refrigerator in my possession, I resume my query.
already controlled all the electrical part and being all within the normal parameters (the 2 sensors, resistance, dumper, forcing), I put it to work and control the temperatures in tower or tunnel of cold (pulling very good cold, degrees below zero to shortly after starting it.) Then I put it in the ducts of air return to the freezer (here is where I had the problem, they were frozen and covered) and the zonda marks me -5 °. My question is whether this supposedly hotter return of air at that temperature is ok?

lusangor

56.366

hace 6 años

supposedly ok, just let her work doing her cycles and check the next day

gustavo gabrieltecnico

3.731

hace 6 años

hello adrian, supposedly they have to start the 2 at the same time, capable that with the passing of the days, the time will come that the forcer does not start anymore, so it is blocked, this can be a failure of the relay of the forcer who is on the electronic board, if you have a trusted electronic technician take it for review, greetings.

adrianbu

18

hace 6 años

Thanks for the info, I control it a few more and if it persists or worsens that of the forcer I take control of the plate. Then I comment how it went. thank you