⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Refrigerators
Fridge no frost strip water
hace 6 años
hace 6 años
good night colleagues! Some time ago I bought a Goldstar refrigerator (used) not frost, and from day 1 I threw water on the side at the time it defrosts, just today I started to disassemble See where that water comes from and I found this (attached Photo)
I wanted to know if the duct that runs through the water can be diverted above the motor-compressor (in a tray) so that it evaporates. Greetings people! [Img] https://adjuntos.yoreparo.com/imagen_post/0004/14/cd51e3ea30e713a8e89e7acfce9cbbfa57da083a.png [/img]
57.307
hace 6 años
hace 6 años
If you have the way to adapt a tray on top of the compressor, then do it, it is the best, greetings
57.307
hace 6 años
THE TRAY YOU ADAPT above the compressor, could be plastic and glued with silicone for high temperature, make sure that the hose that comes from the drain is inside, should be straight, not crooked, greetings
57.307
hace 6 años
Hi Javi, now if you see the photos, I think you opened double consultation hehe, you can see that the original tray was removed, but if there is space for you to place a plastic tray on top of the compressor so that the hose fits well that comes from the top of the drain, you leave a small decline so that the water is in the hottest of the compressor and thus the water would evaporate more quickly, greetings
hace 6 años
hace 6 años
Hi, that mechanism has a tray next to the compressor and you see inside the tray a roller of the high spout of the compressor which comes out at high temperature of the compressor and is enough to evaporate the water would be the same temperature that the compressor has. .. I hope to help you ......
hace 6 años
Touch the high spout or the finest of the compressor and you will see that it is quite hot .... but you have to get a tray to glue it with silicone to the compressor and put a hose that drains the water to the tray
hace 6 años
If I understand you if you can modify it and it gives you more peace of mind it is better .... I doubt the pipe that comes out of the compressor that has a small filter is the high one that goes to the condenser or (grill) ??? Xq next to the compressor should be the tray and inside the tray a roller or roll of high spout that serves as a hot resistance to evaporate the water .... I hope to help you greetings
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad