⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Fridge does not cut

Lucas007martin
hace 6 años
hace 6 años
Hello everyone, I have a Kohinoor refrigerator with two motor freezer. The refrigerator made ice on the back wall and I noticed that the engine never stopped. Reading other publications, I changed the thermostat. But everything remains the same. Any suggestions? Thank you
ArandaVictor
hace 6 años
hace 6 años
Hi Lucas, I had a two-engine Kohinoor refrigerator too, refrigerator above and freezer below, with the same problem you had, I placed another thermostat and it remained the same, the problem was that the ice I was making in an area just not The whole panel, what I did was change the filter and place new gas. The engine will never stop if the filter is clogged, does not reach the proper temperature for the thermostat and therefore does not cut.
Lucas007martin
hace 6 años

Hi Victor, I couldn't fix it. A technician came, loaded gas and the engine tended to stop because he was old. The clogged filters ... I bought another refrigerator. I did my best, thanks

Responder
NG en linea
NG en linea
9.229
hace 6 años
hace 6 años
Maybe the problem was the thermostat, but if you exchanged it for another that is not of the same cutting range, it will never stop it could also be that your equipment does not reach the cutting temperature due to malfunction
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
Lucas and that ice is made balls? because it could be that the door does not seal well and between outside air, now where is the bulb is well frosty? or it does not have almost frost, because if so, it will never cut, there to make sure that where the bulb is, it has frost, if it does not have, then that refrigerator or refrigerant is missing or the filter is half-covered or is already missing compressor performance, regards
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis