⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

doubt as to component of general electric profile refrigerator.

moblatri
moblatri
1.863
hace 6 años
hace 6 años
greetings colleagues very good night I went to a customer to see a general electric profile refrigerator, that is, with two vertical doors, the electronic card was burned and the technician who attended the refrigerator placed a timer to replace the card I had , the same does not work properly, I put another card and the components that were missing, but I have a doubt this fridge has a thermodisk, and this is my doubt those refrigerators use thermo disc originally or only use a thermal with hot melt or it really carries the thermodisk and if it does not carry it and it was placed, it would affect me in the operation of the refrigerator in question, beforehand thank you very much. The model is GSH22KGMC CC.
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
Mobratri sorry, but I don't know what a thermo-disk is, is it the bimetal? If so, if you have one, it does not have a thermo-fuse and the 4-wire fan has a sensor in the wiring, I would say do not get in trouble, because I imagine that the one who did that modified the fan or I'm wrong? also the wiring in short, and all groped, but if you have already corrected and say that if it has a thermo disk that I suppose is the bimetal, if it carries, luck.
moblatri
moblatri
1.863
hace 6 años

Thanks Fermín. I just don't understand when you say that the fan has four wires. Why two wires are for walking the fan and the other two are for sensor.

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

Moblatri no, in 3 wires the direct current enters is 13 v direct current, the red and yellow are positive and the negative white and blue is the one that controls the speed, that is the speed variator, the sensor, commands the orders to the card, do not bring those fans' they changed it or if you still bring it, greetings

Responder
moblatri
moblatri
1.863
hace 6 años

Ok thank you Fermín I already placed the fan and coinsiden the colors with the wiring that had the one that was removed. I connected it and started without problems. Any other questions I let you know. Thank you and good night.

Responder
Fermin 007
Fermin 007
57.307
hace 6 años

Moblatri, good night and we are in contact, if I start, well already, greetings

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis