⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Coventry BC 2150 thermostat

patarcas
hace 6 años
hace 6 años
Hello, I bring you a doubt. I think I should replace the thermostat, since the refrigerator starts only if I tap it ... When removing the case I discovered that it has a metal ear that serves as a push button and I don't have to hit it (hehe) and that's how it works at least not to lose the merchandise. The issue is that they told me that the model is old and the original is not available. it occurred to me to take it out to take it to replacement houses and, while I get a replacement, make a bridge with the cables and plug it into a timer that I have in a terrace lights that I can program from 15min. the cables I have are 5 ... light blue (to the lamp switch) ... green to connector (ground) .. ... black to connector ... white to connector ... brown to connector (bridged to the lamp)... I do not know if you understand ... if I can upload some photos ... greetings. https://drive.google.com/open?id=1CoyijPc7BJFiAW090Q4C7lG63jnxdBot https://drive.google.com/open?id=1X2YaegooOgt3a_JpMOQIw_0q7wLrMLqC https://drive.google.com/open?id=1t_sO8NLMmXK4rqfmCiq4amCU1Nm8F6aY
lusangor
lusangor
56.366
hace 6 años
hace 6 años
Hello, for the compressor to work, it bridges the black with the brown, each terminal should have a number, the black I think is the 4, the white the 3 and the other the 6, check Regards
patarcas
hace 6 años

Thanks lusangor .. I already got the spare. I add a doubt ... the bulb enters the hole in the side wall, goes outside behind the refrigerator and flies in to get caught behind the white panel ... I don't know if that panel is removable or if it carries gas. .. the bulb should be squeezed by a grampita that brings but that is complicated to manipulate. For the little space ..

Responder
lusangor
lusangor
56.366
hace 6 años

That panel is the evaporator, it has a coolant, it can be manipulated a bit to install the bulb that has to be attached to the evaporator so that it detects the cold correctly

Responder
patarcas
hace 6 años

Perfect ... I left it supported and it seems to work fine. I estimate that leaving it tight with the plastic screws will improve the performance .. I'll tell you ..

Responder
lusangor
lusangor
56.366
hace 6 años

Put the screws, just so that it is stuck and can not move, the operation will be the same, but it must be attached to the evaporator
Luck

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis