refrigerator under table with freezer brand MABE is made the change of compressor. on the recommendations of the seller of the refrigeration house I place a 1/8 motocompressor because the previous tecumsh motocompressor did not include hp features. it happens that the condenser does not get to heat much less cold in the evaporator (press 0psi). The gas preload, before starting the engine I had to do it up to 0psi and then add without exceeding 0 psi because the engine strives to cut by thermal protector. Thank you very much, colleagues.

Charge about 15psi off. Control the amperage with amperometric clamp. And go charging it slowly until you leave it at about 0.8amp and see if it starts to cool slowly with the thermometer.

Another important thing, sellers are not technical, do not trust all the confidence even if they have the best intentions are simply not specialized.