Good morning folks, I find that a refrigerator above does the thaw not very well, I already checked the 2 resistors, (the aluminum one replaced it with a glass one because it was damaged) but in the thaw I notice that in the middle it doesn't thaw the coil in the middle completely, I assume that it is not resting during the 6 hours of work, so I check the thermostat and find something new in my short experience with refrigerators of these; the analog thermostat has an electronic resistance wrapped with a plastic similar to that of the bimetallic, but it is a resistance of those used in electronic circuits, it is 5 strips, of the green ones, which according to them the resistance should measure 120 omhs, but when I test it with the muletillero measures 18 Kohms, and in continuity does nothing. Please if you can help me with this information, I thank you very much in advance.