Problem in Consul refrigerator
Jose, did you find the leak? If not, first try to make it empty so that you do not spend gas, when you do it empty, go through the visible parts of the pipe with water and soap if there is luckily the leak, in case you finish and do not find it, that is It is in the inner pipe of the fridge. sometimes the concealed one can be removed and a new line can be inserted externally so as not to crack the refrigerator, in others the sheet can be carefully cut through where the pipe goes inside, search for leaks (s) to weld and test with vacuum, minimum of one day to the other (that does not lower the vacuum of the vacuum
empty,) refill gas and rearm and see that it makes all its stops and starts your fridge, but before doing anything, tell your client the possible solutions to see which one he thinks so that you apply greetings and keep commenting
I found the gas leak was in the pipe where the pressure check was done was broken. Thank you very much for your comments
Hi ... how can I fix it since the leak must be in a non-visible place. Is there any liquid or can only be repaired by welding. Thank you
The tube that was damaged is the tube that is taken pressure and gas inlet was changed and was running. Thank you
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación
