Fridge mgic queen with new thermostat fails to freeze
Good morning Mr. Fermín ..... He explained a little more detailed .... The fan works with the door closed and starts well but just begins to frost the coil goes out (with the door closed) .... When I open the door begins to work better I think that the bulb detects that it starts to lose cold (with the door open and the thermostat on if it manages to freeze the coil but ideally do so with the door closed I think ???
Good morning, dear Roberto, then correct what you say here, is that when you open the door above the fan works .............. it is the opposite, when you open the door you must turn OFF .
Copy the part of your comment: with the new thermostat connected it can not freeze up or cool down ...... IT GOES LIKE A DEFROST MODE WITHOUT REACHING THE PROPER TEMPERATURE BUT I OPEN THE UP DOOR AND START THE FAN ALREADY TO FREEZE THE SERPENTIN .... I CLOSE THE DOOR AND HAPPENS THE SAME .....
2- I BRING THEM THE THERMOSTAT CABLES AND THEN WORK WELL BUT NOT FOR
Edit your query and PLEASE CORRECT please that WRONG part, so that there is no confusion, thanks and see you soon, regards
Hello very good day friends I could not edit the question xq I do not get the option ... I WAS ALREADY DONE FAILED .... THE FOLLOWING HAPPENED MY Fridge ORIGINALLY BRINGS THE THERMOSTAT IN THE UPPER DOOR (IN THE FREEZER) thing Uncommon and the thermostat that I buy is for the refrigerators that have the thermostat on the bottom ... This works with a slightly higher temperature that is why it stopped before it managed to freeze ... change it position for the bottom and is working well although it is not the correct thermostat
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
