⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Atma NEO F.HFC4423B

Beto Orchosky
hace 6 años
hace 6 años
MY refrigerator does not frost, it works badly. The refrigerator (upper part) cools well although inside the back wall frost and ice together ... But the freezer does not freeze, it is fresh but does not get to fry anything, and also in the inner rear wall at medium height it forms frost and ice
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
You have to defrost all the freezer and the drain and the ducts, help yourself with a hair dryer and boiling water to finish faster, since you see that the water falls well to the drain container and that everything is removed the ice, dry very well everything and you take the water out of the container, you close and test it and put it under observation, you must cut from time to time for breaks by temperature control and also for automatic defrosting, greetings
Beto Orchosky
hace 6 años

I set it to defrost several hours, but maybe not enough time for it to thaw completely. I'll see to make sure your total thaw. Thanks a hug

Responder
davidefrainrod
hace 6 años
hace 6 años
Hi beto, I don't know your exact refrigerator model, but without fear of making a mistake, your defrosting system is failing and it is completely blocked by ice preventing the passage of air to the refrigerated compartments. You can do the following ((if you have any doubts)) defrost it completely ((it takes time)) and start working again to cool until it crashes again I clarify that if you do not have knowledge you should call a technician because it may be failing the thermal fuse or the defrost and temperature sensors or the central plate or the internal fan or burnt resistor in short as you see are many components that where it broke one does the thing of filling with ice. To defrost moderately fast in the freezer part open door and place fan a few hours greetings luck
Beto Orchosky
hace 6 años

I set it to defrost several hours, but maybe not enough time for it to thaw completely. I'll see to make sure your total thaw. Thanks a hug

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis