⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Fridge bosch 340

Matias Palacios
hace 6 años
hace 6 años
Hi. How are you, dear? I have a situation with my refrigerator. Cool very well, up and down. But the issue is that the compressor never cuts and the inner wall of the lower part is filled with ice. Defrosting is done and on the 3rd day it is filled with ice again. Which may be? Thank you.
NG en linea
NG en linea
9.229
hace 6 años
hace 6 años
Hello, if it is an electronic card, you should start checking the sensors, mainly the ambient one that is the one that acts as a thermostat. If it were analog it would be the thermostat.
Matias Palacios
hace 6 años

I just found out from my wife (my father-in-law was the refrigerator) that they left her like this several years ago (the compressor never cuts). I could not explain why. I am an air conditioning and refrigeration technician, I know the basics. My question is; Can the issue of freezing the wall be solved by watching and, if necessary, changing the thermostat? Thanks NG

Responder
Matias Palacios
hace 6 años

Sorry, I didn't clarify that something. It is analog.

Responder
NG en linea
NG en linea
9.229
hace 6 años

Without a doubt, the fact of not stopping is the thermostat. Once the problem of stoppages has been solved, we should see if the defrosting system works
M

Responder
Matias Palacios
hace 6 años

OK great! I will start there. Thank you!!

Responder
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
If you do not cut the compressor is the thermostat, replace it with an equal one.
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis