⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

My refrigerator turns on the light but does not cool

Heladera Electrolux DC41

Heladera Electrolux DC41

Daniel Omar Altamirano
hace 6 años
hace 6 años
Hello, I have an electrolux dc41 refrigerator, it turns on the light but it does not cool, my wife had previously lowered her cold level since she did not have many elements inside.
Clima Bueno
Clima Bueno
3.681
hace 6 años
hace 6 años
Does the engine start? If so, you should check the thermostat, maybe it stopped working, raised the temperature and listen if the compressor starts, if it still does not start then change the thermostat; Take out the old one and buy one with the same characteristics. Regards
Clima Bueno
Clima Bueno
3.681
hace 6 años

Ok, do you know how to use a tester? If you dare, I measured to see if the motor reaches tension, otherwise the thermostat changes. Although I am inclined to be that since it worked well until the cold went down. Regards

Responder
Daniel Omar Altamirano
hace 6 años

OK thanks!! If it was from what the cold went down, just turn on the light and does not start.

Responder
Clima Bueno
Clima Bueno
3.681
hace 6 años

Moreover, what you can do is bypass the thermostat wires to test, there should start the compressor. Eye that you will surely see 3 wires, one is mace or earth and is usually green and yellow or green alone.

Responder
Clima Bueno
Clima Bueno
3.681
hace 6 años

The ones you have to join are the other two, if you have doubts, Google it to see how it is done. Regards

Responder
Fermin 007
Fermin 007
57.307
hace 6 años
hace 6 años
If it is with a thermostat, maybe when the level goes down the compressor turned off and when trying to start very soon it is protected by not matching the pressures, this is normal, but if it still does not start, disconnect it and then turn the level Asia up and down Asia then you leave it at a medium term, say 3 or 4 and wait a few minutes and connect it, if it still does not start, check the thermostat, maybe the internal swich is damaged and will have to be replaced.
Daniel Omar Altamirano
hace 6 años

Thanks Fermin! I did what you told me and it worked, what I don't know if it cuts, to boot it started, thank you!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis