[img] https://adjuntos.yoreparo.com/imagen_post/0005/08/7fe633680a627a6276aaaaaaaaaaaa img] Hello good day to everyone, trying to revive a Siam HSI cc30b refrigerator, it came "DISCARDED" because by the client's sayings, this refrigerator passed through inexperienced hands that only aggravated the main problem of the same, after fighting I could revive the cold stage, now I have the electronic part, the plate turns on, the temperature sensor works in the correct ranges, the problem I have is that it does not operate the relay that should start the engine, the engine is working properly, and that I connect it by bridging the relay and it works (obviously it does not cut) the relay was tested with 24 volt direct and works without problem, the problem is that from the board the 24 volt that the relay needs to be activated does not come out, I have very basic knowledge in electronic, but if they tell me what to measure and where, I can do it without any problem, the board has a PIC16, I already checked capacitors, diodes and resistors and everything works well for me, the easiest thing would be to change the board, but I want to try to fix this so that to put another expense to the client, I hope you can help me, I could not find diagrams on this plate

Pass it to Naloga with a timer and you take away the electronic problem. Regards