⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Refrigerators

Vitrina masser modelo rhna 1500

Donysel

hace 6 años

The problem is that only half cooled in this case that you have to do the compressor is new model changed rhna1500 mark másser was working as two months didpudi began to cool the mita what I have said

Comentar

NG en linea

9.229

hace 6 años

Hi . It is likely that you have a leak and you are losing gas or when you changed the compressor did not do a good cleaning to the internal circuit, change filter and vacuum and is presenting obstruction in the system, It would be important to take the pressure.

Comentar

Donysel

hace 6 años

In this case when taking the pressure if it is by extrusion how much should I measure in this case if it is covered



Responder

NG en linea

9.229

hace 6 años

If it is covered the suction will be low or it may reach 0 or vacuum and the high one will also be very high .. touching the condenser and the compressor if the notes are very hot is a sign of obstruction. But if it is close to room temperature, a leak is more possible
Check also the consumption of the compressor
The question is that the 2 things produce similar effects



Responder



Fermin 007

57.307

hace 6 años



hace 6 años

If the work lasted two months, almost certainly there is a leak in the system, it requires a guarantee, you are in your right, pressurizing in parts (evaporator and condenser could run away, luck.

Comentar