Hello people ! I have a family refrigerator that manufactures the evaporator and the cold plate the whole arming and loading. Now it turns out that the frizeer does not pass me by -8 and in the bottom we would be good because we are in 4 degrees. freeze the low pipe as if it was past gas but I was pulling it out until it was at 0 psi and I still snowing the pipe. if someone mw can throw some idea thank you.

Hi, I happened to have refrigeration systems like refrigerators freezes the tube low, and it is the compressor that is a little decompression to do and a part of the refrigerant is returned with pressure and ice base in the low pipe

Hi, if you made the evaporators the problem is that they have been disproportionate the size of each other, as well as with relation to the size and capacity of the condenser. It is possible that you need to make the primary evaporator bigger, and a little bit to the secondary, it will be good to explain in more detail the modifications and how you did, ie gauges and long used t if you also changed the capillary, greetings.