⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigeration

Fridge whirlpool wrm29 turns on light does not work

audiotest
hace 5 años
hace 5 años
Hello my refrigerator is a Whirlpool WRM29, the circuit breaker jumped, it was the refrigerator, I switched it on again and it jumped again, I disconnected the earth, it turned on (the internal light) but it does not work, I reconnected the earth to see if that era the leakage, the circuit breaker does not jump but it does not work, only the internal light. What would be the possible problem? Thank you so much
audiotest
hace 5 años

Hello, today a technician came and I turned the timer said it was apparently locked and began to work, told me to control it, still walking but not stop, that is it was disconnected six hours and started seven hours ago is normal? Thank you

Responder
audiotest
hace 5 años

Well, now it stopped and seemingly short and starts, the technician what he did was first to bridge the wires of the timer, as he did not start he regulated it and put the thermostat in "normal" because for a long time someone had put it almost at maximum That is all I know about the subject, now the idea would be to observe it and if it fails again try to change the timer? Do you get these Whirlpool parts? because I understand that they are not sold in any house-Thank you very much

Responder
diegote7937
hace 5 años
hace 5 años
The first thing you should check would be the thermal protections of the compressor, even if that works you can have the thermostat broken. in the worst case you have a damaged compressor and that is why the circuit breaker might jump
diegote7937
hace 5 años

No, it is not normal for 7 hours running

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis