20171110_175931.jpg [3.67MB] fabricadora shop is entered and does not enter the compressor, but the display indicates a countdown as if it were working normally, I wanted to know what component is the one seen in the image and what is it for
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Refrigeration
20171110_175931.jpg [3.67MB] fabricadora shop is entered and does not enter the compressor, but the display indicates a countdown as if it were working normally, I wanted to know what component is the one seen in the image and what is it for
Ice cream maker Electrolux HICMo2
48
hace 5 años
hace 5 años
20171110_175931.jpg [3.67MB] fabricadora shop is entered and does not enter the compressor, but the display indicates a countdown as if it were working normally, I wanted to know what component is the one seen in the image and what is it for
2.331
hace 5 años
I don't know which component you say but the one that brings the red and black wire is a thermal protector and the one below is a starter reley
48
hace 5 años
Yes, and how do I prove it is ok? what voltage should I measure and between what points, I suppose should be the line voltage 220v ...
48
hace 5 años
hace 5 años
If indeed, connecting it directly starts, but there is some problem in the platelet, the equipment was returned at the customer's request
202
hace 5 años
hace 5 años
Hi, I had a similar problem in a soft ice cream machine. The issue was the gas charge. I emptied the circuit and loaded it with the amount indicated for that machine model and it was a jewel. I hope it helps you. Cheers
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad