Dear, I am looking for your help with the following, it turns out that I am about to install my Split air conditioning equipment, I have already selected the wall and the location in order to take advantage of the best possible distribution of cold / hot air. My subject is that I cannot directly drill the wall to take out the installation behind the indoor unit, because my neighbor is there and I don't think he likes having the outdoor unit in his main room hahaha. Then I have to do the installation up and take the pipes through the ceiling, the split of the roof would be 15 cm so it is not a long distance or anything like that, but I wanted to know if there was a problem with making the curve up I leave a terrible drawing to explain, of course thank you very much everyone :)

Hi. In the case of drainage, if you have no other option, some bulbs are sold to extract the water. regards

Hi Dnp: It can be installed without problems, in the manual it tells you if you have to add refrigerant from a certain distance, in the cases I saw it is usually more than 5 meters and it tells you if you exceed, how much refrigerant per meter of pipe you have to add, the same goes for the issue of oil traps, the manual says everything your team needs. Regarding drainage, if you have to use a pump to remove it. Luck, comment your results.

Hello how are you, you can install it without any problem the distance between the top of the split and the ceiling of 15 cm is the limit not less than that measure so that it works well and the discharge of water you can do for the other side greetings.

Hello you can install it as the drawing, just take into account the drain that can not go up, you will have to take it to the other side or modify everything. regards