⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Air conditioner
Contactor connection to the compressor? Air conditioning
hace 5 años
hace 5 años
Hello people, a question. I have an air of 4500 refrigerators that comes with contactor. The air had already been touched and it is seen that they put it directly without the contact, because the contactor is the contactor without any cable plugged in. And the compressor burned. My question how is the diagram to connect it to the contactor. The equipment has a universal plate on the evaporator. In the condesador no.
30
hace 5 años
hace 5 años
You would have to look at what voltage the contactor coil is if 24 or 220 if it is 220 is very simple and if it is 24 it gets a bit complicated but you have several ways if it is 24 you can change the contactor coil or put a wipe in case of that you do not get the coil and how to connect it I do not remember the name of the pin but it is connected in the largest relay in size that has the plate.
I hope you help me
regards
30
hace 5 años
The excitation coils have a beginning and an end, the contacts of this coil are called A1 and A2 there you have to give the 220v signal for the contactor to hit, that signal has to be sent to you by the relay of the board in the unit inside, the relay has to send phase to the contactor with permanent neutral.
I hope you have understood anything, do not hesitate to ask me
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad