Friend I would like to know if I can replace the motor fan capcitator of the console this was 1.5 mfd and the one I have is 2.5mfd will not affect the engine

Good, as omorma says do not go over that value of + -5%, although it will work, in the long term it can damage the engine of your equipment, if you want to use it temporarily until you get the right one, you won't have problems Cheers

In my opinion it has both starting and running, respect the values because you are giving it much more than what it asks for !!!

Very good, best regards. Well from my point of view there is no problem, since the capacitor is only for starting the equipment and in turn creates an illusion of an extra phase so that the motor can start, indicating that the capacitor has a possibility to start a larger capacity engine without any problem, the +/-% is for when you measure it with a tester the value is not accurate and its measurement is within that value. The engine will ask for what you need at the time of starting Ok, but at the time of a failure as the capacitor is greater there will be a greater energy load, there is where from my point of view you have to be careful. but if you have an external protector calibrated for the equipment it should reduce the problems of air supply.