⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

my weather works without stopping the compressor

Ivanschz

hace 5 años

Good afternoon companions come to you for the following problem, my samsung weather AS12FBCNXAX model of 12,000 btu only cold was several months without work but about 5 months ago I started it again and it works to normality but less than 1 month ago I washed it of the evaporator and condenser and since then it works continuously without turning off the compressor without freezing, I set the temperature to 30 degrees with the control and even then the compressor does not stop working, it only stops when I put it in fan mode but it is annoying to get up at dawn because of the excess of cold, can someone help me?

Comentar

pablo lamas

2.661

hace 5 años

Hello, check if the temperature sensor is in place, if it is changed, why it is not recording the temperature of the salom, greetings.

Comentar

Ivanschz

hace 5 años

Good night, Pablo Lamas, the sensor was in its normal place, I placed it more inside the evaporator but it still has the same problem, should I place it in the evaporator lamellae or where it suggests?



Responder

pablo lamas

2.661

hace 5 años

Hello, that sensor is devalued, it does not record the temperature, you should definitely change it, regards.



Responder



caracucho

419

hace 5 años



hace 5 años

correctly, it may be out of place and it does not feel the room temperature, or it is simply devalued.

Comentar

Ivanschz

hace 5 años

Good morning caracucho I was checking table of values for thermostats of 5k, 10k and 15k omhs, how could I know to what extent is mine?



Responder

caracucho

419

hace 5 años

well hno, in this case as you do not have the original value (since that depends on the circuit) you must perform a test with the energized equipment by placing a variable resistance (20 k potentiometer) and vary until you can activate the card, once Activate, disassemble the potentiometer and measure the value in which it was ...... It is already a little more technical test.



Responder

caracucho

419

hace 5 años

Another thing that can guide you is by measuring the pipe sensor, one of the two is usually damaged, and the value of the other can be referential ..... but EYE are not necessarily of equal value, only by experience I have measured them and for the most part they have given me equal value .......... I don't know if I explain myself ???



Responder