⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

length of the installation kit in split equipment

Joe

hace 5 años

Hi colleagues in the forum I need to know if the length of the installation kit that the split-type A / A equipment manufactures influences, that is, I know that they come with a minimum of 3 meters and my doubt is if this distance can be reduced and if it It would cause some damage to the equipment. I would also like to know the maximum allowed distance between the condensing unit and the evaporator. Thanks in advance

Comentar



TRIATLON99

6.267

hace 5 años



hace 5 años

Hello, the product warranty requires 3 meters in terms of operation with more than 1.50 meters without problems (talking with refrigerant r 410 a). The maximum pipe length is specified by the user manual in some cases up to 12 meters or more, at a greater distance than required, refrigerant is added. regards

Comentar

Joe

hace 5 años

Any technique to add refrigerant when the distance increases?



Responder

TRIATLON99

6.267

hace 5 años

Also specified in the manual, are 20 or 30 grams depending on the pipe in split equipment for each additional meter.



Responder

Joe

hace 5 años

thanks a thousand for the help, tell me if it is possible to bring that data to pressure, that is, I only have a manifold set for r410a



Responder

TRIATLON99

6.267

hace 5 años

Working pressure 100/120 psi according to ambient temperature at higher temperature plus pressure.
The equipment must work 15 ', controls the pressure and if necessary add refrigerant.
regards



Responder