When installed and proceed to corroborate its operation, the indoor unit turns on, the indoor fan works but only throws wind at room temperature. the outdoor fan also but only works for 3 or 5 minutes and turns off, pulls wind, the temperature of the pipes that connect to the bearings are at room temperature. the manifould marks 250PSI low and does not vary with the equipment on or off. I think the terminal connections are fine but today I will check again. Any suggestions? I would greatly appreciate your collaboration and suggestions. I think that because of the way the pressure manifests and the temperature of the pipes, the compressor would not be working because it would have to go down for at least an instant when it sucks. Unfortunately, the person who was above verifying its operation did not know how to tell me. But I went ahead to ask if this happens normally and the inconvenience may be another. Thank you very much for understanding.

Hi, are the valves open?

Hello partner, you must check if the compressor works and measure your consumption, regards.