⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

evaporator connection cable, condenser

Miguel_cr7voltaje

hace 5 años

I installed a 5500 or 6 frig equipment, when I bought the materials I asked for 5-wire thick cable thinking it was cold heat. It turns out that it was cold only and when I went to connect the cable I see that it was 1.5 I put it the same, but now I remain the position of conscience, I recommend that you go and put 2.5, the boy I think I didn't turn it on yet because I wanted to make a separate line. Thank you

Comentar

TRIATLON99

6.267

hace 5 años

Hello, which cable do you mean the connection between units?
Is it a new team? Brand? 'Capacity?



Responder

Miguel_cr7voltaje

hace 5 años

I do not remember the brand is a new split I think it was 5500 or 6000 frg philco,
the cable that I put from terminal block to terminal board int and ext 1.5



Responder

LUKI 72

hace 5 años

Hi, I recommend 4mm thermal cable input, from 10A to 15A, AND THE INTERCONNECTION OF EQUIPMENT TO EQUIPMENT 2.5mm cable ...... Comment for more information greetings

Comentar



TRIATLON99

6.267

hace 5 años



hace 5 años

For example, the maximum diameter of the interconnection cable in its equipment is 1.5 mm. In your place I would look at the manual and place what corresponds, keep in mind that any installation failure does not cover the warranty. Regards

Comentar