⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

James air

Pablo Muñiz

hace 5 años

Hello, I have a problem with my air, I turn it on in cold mode and it comes out color (heating) I disconnected the coil from the inverting valve and there are times that it cools and other times, it keeps coming out hot xq ??? The compressor and electro fan turns on normal, thanks

Comentar

huanc

227

hace 5 años

Maybe this half locked and sometimes it's halfway. But it shouldn't work well if that happens and what you say works well. And you tried putting it in heating mode to see how it works.
It should energize the coil in heat mode. Look over there you have to lie to the sensor to activate the platelet.
Comment
Regards



Responder



huanc

227

hace 5 años



hace 5 años

Do you have the setting from the remote control by car? possibly the reversing valve is locked. Did you test if the valve coil when the energy moves the rod inside? try putting another coil on it if you don't hear it move. You can connect it directly to test it.

Comentar

Pablo Muñiz

hace 5 años

Yes, connect it in 220 directly, and actuate yes, I also gave the valve a few gentle strokes but nothing, what I do not understand is that sometimes it works well and sometimes not, being that the valve is disconnected (it should not move)



Responder

Pablo Muñiz

hace 5 años

It moves if the stem, but still hot, put in heating mode and does not work, nothing turns on



Responder

huanc

227

hace 5 años

But you lied to the sensor.
Set it to 30 degrees in heat mode and cool the sensor.
It should start.
If it does not, there is a problem in the platelet or the sensor.



Responder