lenin_jesus

5.034

hace 5 años

if I don't get water that moisture you take it out empty. Although if your desire is to get the oil and put it back who told you that you can not? Of course, what you can do is to disassemble it, turn it over and take out all the oil and then put it back in with new oil, 1700 milliliters of oil or 1.7 liters.

lenin_jesus

5.034

hace 5 años

I told you that once I had to check an air of 5tr or 60000bru that the compressor sounded very ugly the sound was mechanical, it had a leak in the suction pipe before reaching the compressor and had no refrigerant. What I did was to correct the leak change filter, I emptied it and before loading it with coolant I put oil in it by suction, put the pressure gauge and it sucked in the oil then charged it with gas and the sound was removed until today That compressor is working. there I leave that comment greetings

lenin_jesus

5.034

hace 5 años

You can remove the moisture by emptying it, if you told me that it was that water fell there if I told you to change the oil because not even by emptying it would you remove that water since it would mix in the oil. Make a good vacuum and go.
Remember to change the filter before emptying

huanc

227

hace 5 años

Okk
You know I didn't see it on the filter. Should it be in the indoor unit?
Is this the type of dryer filter?
Like that of commercial refrigerators?