⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

The audinac sp 3500 air conditioner turns off and shows f4

EliasP

hace 5 años

Q such today install a new air conditioning cold heat. Audinac sp brand of 3500 watts respecting pipe lengths and emptying When we finished it, I turned it on and after a few seconds left only the axial fan of the indoor unit and turning on the display.It stopped and I got F4.medi the sensors of the indoor unit and are of similar values. Do not perform other tests. I get tired of searching the internet and I can't find the brand and model in terms of fault or error codes. I hope someone can help me. From already thank you very much

Comentar

TRIATLON99

6.267

hace 5 años

Hello, it is no longer dependent on the installer, it is a problem of the equipment and being under warranty the customer has to call the technical service of the brand.
Comment



Responder

EliasP

hace 5 años

How they changed my equipment and now yes. The cumbersome thing was to take out the one that did not work and put the new one. Thank you all for helping



Responder



efectouno23

hace 5 años



hace 5 años

Check the installation of the terminals of the indoor unit and the outdoor unit if the connection was made correctly. unit to know the terminals you have to check 3pace compressor motor capacitor

Comentar

EliasP

hace 5 años

Q such. I measured the spout and hunger sensors again and they are fine.



Responder

EliasP

hace 5 años

Sorry tilde as solved but. I didn't make it yet



Responder

efectouno23

hace 5 años

So we are talking about command plate problems if the equipment is recommended to take it to the same but the excuse they make is that the installer has to be registered now if if you are going to have to remove the evaporator plate You can do it without disconnecting the unit but you will have to disassemble the housing of the unit so that you carefully remove the plate and take it to repair for it you have to carry platelets with remote control and sensors in my province of Tucumana they do it to that work and I it cost $ 600



Responder

EliasP

hace 5 años

If I investigate, I agree with you, a garron that the team is new and I am in the subject
But I don't have a license plate and install it myself. We'll see what happens
Thank you. To all for the help provided



Responder