⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Air conditioner

Low speed in split turbine

ArielWar
hace 6 años
hace 6 años
Good I did a cleaning of a split that was not cooling well, said device due to an electrical problem (high voltage in the neighborhood, everything burned) they changed the plate, after the cleaning was well cooled, good pressure, correct thermal jump, but The turbine has medium speed and does not change, what I see is that they also placed another capacitor of the yellows. Thanks and I look forward to your help. PD: The air is 2 years old and I don't have the model or brand data.
davidefrainrod
hace 6 años
hace 6 años
Hi ariel, you have to check that the turbine bearings are not slowed down and the dirty turbine check capacitor should be 1.5Mf and you should check that plate was put since if it is original it would work well as it was working but if it is universal plate there are models that depend where and how you connect the turbine cable you have a fast or three speeds if so you should try the turbine is at maximum.
ArielWar
hace 6 años

Well all that I did, clean and I thought that with that I would have good speed, I'm going to look at the capacitor over there I change it, it is a generic plate and the truth leaves a lot to be desired as many loose wires left it, I am only cold. Thanks for the reply

Responder
davidefrainrod
hace 6 años

If it seemed to me there is a generic model that you connect and there is only one speed left then you must test if it has 3 outputs with a relay each which is the fastest one and you connect turbine cable in that relay

Responder
davidefrainrod
hace 6 años

Ahhh many times you connect the turbine cable to the cable that has 3 terminals and although you connect in the 3 rely it has very little difference in rotation between one speed and the other

Responder
ArielWar
hace 6 años

Thank you I will do all that.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis