I greet all my people, I have a split air of 12500 btu the condenser unit fan motor makes a lot of noise when it is running, I lowered it and I checked it and I noticed that it has wear in the mass the motor is 30w with 3Mf capacitor In spite of its wear it worked very well (cools) towards the compressor rest cycle well but with fear that one day it could stop and damage the compressor, I decided to replace it with one of greater watts of an air that I have damaged of 35w with the same 3Mf capacitor but when everything is working THE COMPRESSOR DOES NOT REST , it works directly but cools well ... I need an orientation from you to find a quick solution ...

the fault comes from the card check the sensors to see if they are not devalued and without tension check the relay that turns on the compressor to see if it is not stuck ....