Dear friends I want to know how to make the vacuum to a split air since I have to move it from place thanks to who can help me

To move it you must re-pack the gas from the equipment. I do it with the pressure gauge (for me it is better) but if you do not have good there is another way. You must operate the equipment the compressor must work then close the high key that is the fine spout that is in the outdoor equipment after about a minute you close the low key and turn off the equipment .. Ready it is already repackaged To empty the equipment after installation, you must have the vacuum pump. And manometro you connect blue hose to the service key and the yellow one to the vacuum pump. 20 or 30 minutes maso less then close the pressure gauge key you have to stay at -30 psi leave it 15 minutes so if it stays at -30psi if you do not have leakage otherwise if there is leakage. Then release the gas and put it into operation and finally you take out the manometer. Luck