

Thanks for the prompt response. I have the photos but he didn't upload them to me. I will try again to see if it comes out. Thank you very much again.
To upload photos use the fourth icon (landscape box) the photo must weigh less than 2Mb
Surely you used the fifth icon (crochet) which does not work or the photo was very heavy, in that case shrink either by cutting or reducing pixels
To modify the question and add the photo use the button with a pencil under your question
I already published the question with the photos, the best I could. If I did something wrong, know how to apologize. I will improve with practice. Thanks again.-
I appreciate your patience. Sorry for the mistakes.
A friend tells me that it is the red wire that goes alone and the others all together in the other terminal, can it be?
They are 5 wires. Three blues, one white and one red. Two blues go together, the other blue goes with the white and only the red remains. The capacitor has two terminals.
According to the diagram the three blues and the white go together and the red goes alone
Being a bipala terminal capacitor and you need to connect 4 wires you will have to use terminals with side outlet or splice the wires (the latter only if the equipment is not under warranty
The capacitor has two terminals with 2 blade connectors each
You have 4 wires that you have to put in only one of these terminals and having only 2 blades you will have to connect the other two wires in that same terminal without going to the other terminal
The other terminal also has two blades and you will use only one, the other is free and you cannot use it for other cables
Excellent friend!!! I just connected the capacitor and the equipment worked correctly.
I can assure you that here, in Misiones, with 40 ° C at this time, the air working is a blessing.
Thank you very much again!