⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

error E3 air split SANKEY 18000BTU

oriana2009

hace 6 años

I greet all the comrades of this community, I have a split air of 18,000 btu brands SANKEY turns on and then goes out and appears in the displey E3 I NEED TO BE ORIENTED TO THE POSSIBLE FAILURE TO LOOK FOR SOON SOLUTION

Comentar

PARDO DIONISIO MANUEL

hace 6 años

Hi . It is very possible that you have lost gas and have low pressure. Look at the sensors that are well connected or not undervalued. Some pipe obstruction. look at the compressor motor and fan capacitors that are not undervalued, if it is not there the problem may be that the circuit has moisture or the electronic board is failing

Comentar



duglas

1.680

hace 6 años



hace 6 años

the cod. E3 corresponds to the solid or ambient sensor that is short or undervalued, it is the one that is embedded in the evaporator coil, is one like a copper tube and the other is black that is like a pill and is attached to the evaporator coil both are connected with a cable that goes to the card take them out and go with that to a white line store and shopping I hope it serves. Regards

Comentar