⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

R22 gas air refill

gusty_ramone

hace 6 años

Hello, I want to charge you to me and I don't know how much time the manometer has to remain. I already saw how to connect the hoses but it is still not clear to me how much gas to put on it, as soon as the pressure gauge has to be left.

Comentar

elektomaq

62.202

hace 6 años

What temperature is it in place at the time of recharging?
Is the equipment completely empty or does it have some load?
It is important that the equipment is in good cleaning and maintenance conditions at the time of recharging to avoid erroneous readings
It is obvious that this is the first time that you do this, it would not be bad, to review everything you researched about this procedure
Comment



Responder

gusty_ramone

hace 6 años

If it's the first time. I am investigating as much as possible before recharging. The equipment has gas that is cold, it only throws enough. I think it looked like this when they made the last load about 3 years ago. They didn't charge me well nose.



Responder



duglas

1.680

hace 6 años



hace 6 años

To charge gas to a Split, the first thing to verify is that it is not leaking in the system, so I suppose you have already done so. being so if it has no gas you will have to make the whole equipment basic for half an hour and you have to break the basic with the gas until at least 150 psi you turn on the equipment in cold mode to the minimum of temp, and here it comes The pressure gauge pressure should remain depending on the ambient temperature we have if there are 20 0 * c It would be 50 psi if it is 25 is 60 psi and 30 degrees is 65 psi which is where you should work perfectly. Salufos

Comentar