⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Air conditioner

12000btu midas air conditioner

paultoralestecnico
hace 6 años
hace 6 años
air conditioning measures 12000btu, refrigeration 134a, works 5 minutes and turns off the external equipment, then starts working 5 minutes and stops again. This is without reaching the requested temperature eg: 17 or 20 degrees Celsius or 25 degrees Celsius. ..in the environment does not feel cold or that the temperature is desired (it cools very little for this situation)
TRIATLON99
TRIATLON99
6.267
hace 6 años

Hi Paul, the air conditioners don't work with 134 r!
Comment

Responder
TRIATLON99
TRIATLON99
6.267
hace 6 años

Hi Paul, the air conditioners don't work with 134 r!
Comment

Responder
paultoralestecnico
hace 6 años

It will be possible, it is R22!

Responder
TRIATLON99
TRIATLON99
6.267
hace 6 años

You have to control pressure, consumption and tension.
After this components, capacitor to start.

Responder
paultoralestecnico
hace 6 años

the equipment works correctly, pressure 65 psi, voltage 218 v, consumption I will check, so this equipment turns off the compressor and external fan and then starts without problems, there is no capacitor problem, just turn it off and on without reaching the desired temperature ---

Responder
TRIATLON99
TRIATLON99
6.267
hace 6 años

Then cut by signal, check the sensors to see their resistance.
Comment

Responder
filotop
filotop
411
hace 6 años

Hi paultoralestec, when the outdoor unit is turned off check if there are voltage in the two lines in the input terminals. . Now if there is no voltage do the following test, in the indoor unit (the evaporator) the ambient sensor that is there, remove it a little from the coil or hang it to see if it passes more than 5 minutes.

Responder
paultoralestecnico
hace 6 años

I'm going to check it and let them know, the sensors

Responder
TRIATLON99
TRIATLON99
6.267
hace 6 años

You said there are no capacitor problems !!!
Regards

Responder
paultoralestecnico
hace 6 años
hace 6 años
change the fan capacitor and start capacitor, in the external equipment, the speed of rotation of the fan was very slow and overheated the compressor motor and the whole unit, the action of the thermal protector towards stopping every time.- the high fan speed and works perfectly .--
filotop
filotop
411
hace 6 años

I congratulate you Paul. . . ! here in Venezuela it is called "crab" when work gets complicated, "I have a crab at work" JE JE JE

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis