Hello everyone. I have a problem with my split of 12,000 btu. Days ago, I noticed that it was blowing very weak, so I decided to clean the turbine with a brush. I did it and noticed the difference in blowing immediately, and consequently, the cooling of the room. It took 2 days or so, and suddenly I see that the led of the interior module indicated that the engine (compressor) was running, but when verifying, nothing, total silence in the engine. A few minutes passed and it started again and it worked for other minutes without "respecting" the thermostat, until it turns off again. It was then that after investigating, and taking advantage of a new capacitor that had it saved, I decided to change it. I did it, and all great, the cooling super good for a good time and as before, that is, the LED indicator turns on and off at the same time as the compressor does. But what happened? After a few moments it went out but it didn't turn on again. What will it be? I would appreciate your comments because now in my country we are very hot and I would like to solve it since my technician is traveling .. ja. Thank you.