AA Midas brand, 18000 btu turns on alone
this equipment has a 220v connection and prescribe the control, verify control batteries, the equipment comes into operation by itself and I proceed to turn off with control and turn off, in several attempts, it also does not receive the signal immediately, I must press and press the control shutdown, after a while it works again., in heating or cold,
I understand that the air sensor and the spout sensor are connections that, when obtaining the desired temperature, open and turn off in equipment, when the temperature rises, reconnect the equipment, in this case COLD USE AT 24 Cª, OFF THE EQUIPMENT AND 1 HOUR OR 2 HOURS LATER, THE TEAM TURNS ON AND HEATING, this is the problem--
The strange thing is this, at all times and the results give me that I turn on with the control or without control, they tell me that it works and that it goes out.-
this case is that it starts alone, and in heating,
Somehow there is a current passage that activates the contact. That card must be checked at a test bench with a specialist
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
