Hi .... The split type air conditioner (LENNOX LM018CO-100P432-1) has a switch that when I turn it on, the outdoor unit starts directly (IT MUST NOT BE ... THIS UNIT MUST BE STARTED BY THE DAM) .. the problem is that I have to turn on the control of the indoor unit because otherwise it freezes ...

relay locked .....

Hi Yadian, what I understand from your writing, is that you are using the micro switch, auxiliary boot, to turn on the computer, and then it freezes, but by the remote control or remote control this does not happen. Obviously something like this happens, because the micro switch button, is used, only to start the equipment in emergent conditions, because for example, the remote control does not work, at the moment we decided to use the air conditioning, because said command, has The batteries are exhausted or the equipment does not simply respond to the order that, through it, we try to give to the equipment. The auxiliary start micro switch, as the name implies, is just for that I repeat and it activates a programming, which operates the compressor, at the maximum limit of its lowest or coldest temperature, so a stop would be conditioned , depending on how well or poorly heated the room or the room can be cooled or even at the time or season of the year in which it is located. However, it would be good to check the anti-frost, coil or well sensor, as you prefer to call it, because it should not allow the equipment to freeze, without stopping the compressor when censoring, the slightest formation of ice or frost on the evaporator. Luck. S @ lu2 friovega63.