⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Air conditioner

Low pressure in a window air

sonyusa

hace 6 años

I would like to know how much more or less the low pressure is in a window air of 10 000 btu with refrigerant r410a. Thank you

Comentar

sonyusa

hace 6 años

And so out with r134a?



Responder



elektomaq

62.202

hace 6 años



hace 6 años

Hello In part it depends on the temperature in the place. One day ... cool 105 psi tempered 110 psi, warm 115 psi, very hot 120 psi the values are average and cold function regards

Comentar

sonyusa

hace 6 años

And if it was with r134a?
What would be the right procession?
Thank you



Responder

sonyusa

hace 6 años

And if it were with r134a how much the low pressure should be approximately
Thank you. In a 10,000btu window air conditioner
Thank you



Responder

elektomaq

62.202

hace 6 años

It doesn't go with 134a, it doesn't work



Responder

NG en linea

9.229

hace 6 años

Hi . Do not forget to check the consumption of the compressor, which is approximate that indicated by the equipment information plate. And alsovel thermal jump.

Comentar

NG en linea

9.229

hace 6 años

If 134a depends on the equipment, this gas is used for air conditioners only for cars and refrigeration



Responder

Rag services

hace 6 años

In optimal conditions of the air conditioner (that is clean, that the electrical components as capacitors are good and thermal) you must have a maximum of 120 psi, and if you have an ammeter clamp measure the air consumption, the characteristic label or plate leaves the consumption in amps (A). Knowing that value you can measure the air consumption and compare with that of the plate, so you will be checking both the consumption and the pressure.

Comentar