Hi Skinny, depending on the model of your equipment, you may have to lift the front mat that covers the air filters, also on the display itself or through a hole to the far right on the equal front of the equipment to locate on that front of the indoor unit, the auxiliary ignition micro switch and tries to press it repeatedly with the equipment off and without power, such as turning it on and off constantly, then do it turning on and off, once again but already with the unit energized. Then turn on normally through the remote control and check if the problem happens again. If after following this procedure, the fault still remains, in that case you should change the auxiliary ignition micro switch, because these over time and due to the high relative humidity to which it is exposed, it becomes sulphated his internal contacts and for that reason he begins to make false contact inside, causing the fault he already knows. Comment please. Luck. S @ lu2. friovega63.