hola a todos, me llego un radio tk8302 el cual traia el led azul encendido y al querer leerlo solo me marca error de lectura o conexion, pedi al cliente me dejara radio para checar. NOTA:no es la version de softw. me percate ese mismo dia al leer otro radio tk8302 que al brincar el paswoord y escribirlo se ponia azul y ya no se puede quitar ni mandando archivo nuevo, alguien me podria apoyar, es que acaso el radio detecta que el pasw se brinco, es radio nuevo 25enero2012.el radio funciona bien en rx y tx solo el led azul queda enc. agradesco apoyo

El led azul, prende cuando a el radio le fue aplicado el "stun" o "radiokill" hay que reprogramarlo ... pero ademas vacunarlo, para que no lo vuelvan a ponchar. Range: Disable: Selects that the transceiver behavior or keypad operation will not be remotely restricted. Stun: Selects that the transceiver will send a Transmit Code configured for Transpond and transit to the stun state. Keys other than the Power switch are disabled while the transceiver is placed in the stun state. The transceiver also mutes tones. The transceiver will revive upon one of the following events. Receiving a revival code Writing of configuration data to the transceiver again Revive: Upon receipt of a Revive code, the transceiver will send a Transmit Code configured for Transpond and revive from the stun state. Kill: Selects that the transceiver will send a Transmit Code configured for Transpond and transit to the kill state. Keys other than the Power switch are disabled while the transceiver is placed in the kill state. The transceiver also mutes tones. The transceiver will revive upon the following event. Writing of configuration data to the transceiver again Default: Disable