⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Radiocomunicaciones

PROGRAMACION RADIOS NX-410

COSKALEL
hace 11 años
hace 11 años
Intento programar radios NX-410 pero mo me deja programar en igual fcia. de tx y rx, como si fueran llamadas 1 a 1. ¿para estoas radios es necesario contar con un repetidor? gracias
maestro_muelas
hace 11 años
hace 11 años
For the NX-410 and NX-900 transceiver, a frequency shifted by -45 MHz from the entered Receive Frequency is automatically configured for Transmit Frequency. Talk Around allows you to configure whether a user can toggle Talk Around between On and Off. Talk Around is convenient if the transceiver cannot communicate with a repeater if the distance between the transceiver and a repeater is too great. With this function enabled, the user can communicate directly with another transceiver without using a repeater. If Talk Around is enabled by clicking on the Talk Around checkbox, the transceiver transmits on the same frequency as the receive frequency configured for a channel and encodes a signal using the same configuration for QT/DQT Decode or for RAN Decode. For a Channel where Talk Around is enabled, Talk Around cannot be disabled by pressing the Talk Around key. To the contrary, for a Channel where Talk Around is not enabled, Talk Around can be toggled between On and Off by pressing the Talk Around key. Range: Check (Enable): Enables the Talk Around. Talk Around cannot be disabled by pressing the Talk Around key. Uncheck (Disable): Disables the Talk Around. A user can toggle the Talk Around between On and Off by pressing the Talk Around key. Default: Unchecked (Disabled) Note: Talk Around cannot be configured if no data is configured in the Receive Frequency edit box. If a Zone or Channel number is changed after Talk Around is enabled by pressing the Talk Around key, Talk Around will be disabled me da flojera traducir, pero ahi esta la respuesta.
COSKALEL
hace 11 años
hace 11 años
Muy amable me sirvió de mucho creo que la valore mal quise poner en verde de todos modos muy amable gracias
maestro_muelas
hace 11 años
hace 11 años
sale con Talk Around
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis