⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Radiocommunications

Ignition problem kenwood tk-2202

José maimae
hace 5 años
hace 5 años
Partners I need advice on this issue ... I have a Kenwood that was charging and received a reception signal of the frequency where it was and is out of nowhere and stopped working ... does not turn on at all ... I am dead. .. I tried the battery with a classic bulb ... and turned on ... but the radio does not turn on; nor does it emit a hopeful sound of turning on ... what would be the possible problem ???? burned ??? Or something??? Who knows????
rescate51
rescate51
488
hace 5 años
hace 5 años
My friend checks the fuse usually burns
José maimae
hace 5 años

And what does that look like or in what way ??? ... and if that were the problem ... what repair options do you have ???

Responder
rescate51
rescate51
488
hace 5 años

removing the plate on the lower side of the battery positive connector is a piece F401 that is the fuse; with a tester measure continuity if mark is good and if not marked is burned. With a little copper wire you make the bridge and that's it.

Responder
goshu
goshu
40
hace 5 años
hace 5 años
If it is not the fuse it may be the capacitor that is next to the fuse, this happens by charging a radio on, it is advisable to keep the radio off while charging
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis