⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Printers

Xerox 6110 mfp printing problems

trs14

hace 5 años

The problem is that the right side of the print is much clearer, which is black. I did a lot of maintenance on the imaging unit, because I printed with stripes, lost dust, etc. After disassembly, disassemble all toners and clean the doctor blade of c / one. the residual dust hoppers. The cleaning blade was changed to the hopper of the imaging unit, because this was why it left dust lines in the drum. After assembling, it was tested, is doing well and from one moment to another began to print as the title says. Check the toner and even powder delivery on the developer roller, I don't know where the problem may be. Thank you in advance for the answers.

Comentar



electrophotographer.

17.087

hace 5 años



hace 5 años

While you see that the black developer roller has its surface homogeneously covered, perhaps the pressure of the black unit on the OPC (and possibly the remaining three colors) is not even on the right side. How can this happen? . When disassembling the imaging unit, a small spring of the two existing ones that rest on the structure and create the necessary pressure for the four stations may have fallen. Check this detail.

Comentar

trs14

hace 5 años

Thanks for the data, I began to check looking at what you told me and the problem was the cables of the image unit connector, they were outside the place where they go, they were 1 mm or so, but with that, the black print half a sheet or less and the rest came out in white, and the colors came out but more subdued, now accommodate the wires and print again and they all go well.
From already thank you very much



Responder