⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Printers

Zebra printer pulls labels on power up

Chuski711

hace 5 años

I have a Zebra industrial printer, model Stripe 400, it works correctly, but every time I turn it on it takes 4 or 5 blank labels. It is a problem because it turns off at night and when you come back in the morning and turn it on take out 4 or 5 blank labels that have to be thrown away. I have already tried everything in the properties of the printer, I have disconnected it from the PC in case it affects it but it does the same. regards

Comentar



Chuski711

hace 5 años



hace 5 años

Well, after much fighting I have found the solution; I put it here to serve someone else. Each time the printer turns on it performs a self-calibration, and that is why those 3 initial sheets come out. What needs to be done is to change that factory setting through the corresponding ZPL II command. regards

Comentar

MUNDO

hace 5 años

hello good afternoon I have a zebra zt410 printer and it does the same to me, I would like to know if you have the commands so that I no longer get labels

Comentar

Chuski711

hace 5 años

In Stripe 400, which is what I have, it must be calibrated and then deactivate the automatic calibration with the corresponding code.
Which is on page 723 of the manual (Zebra Stripe 400); I can give you the notes I take and the manual.
regards



Responder

MUNDO

hace 5 años

hello how about good morning if you would do me the favor of passing the code and the manual where the command is placed because I still can't find the solution



Responder