Hello everyone, my name is Diego, I'm from Buenos Aires, Argentina I have an HP Laserjet 1018, which has this printing problem (attached photo) As you will see, the image to be printed were dice, but stain the sheet and repeat the dice a few times While I am familiar with electronics, I recognize that this type of printer is almost nothing. I ask if anyone knows what could be happening or failing, tell me about a possible solution. Thank you very much in advance Greetings 20171119_140538.jpg [6.80mb]

Hi check the fuser can have the film very worn by the time of use, you should also not have white grease to lubricate greetings.

Change the toner cartridge. The reference is Q2612A. The offer of new compatible Chinese units in Buenos Aires makes them more convenient than the remanufacturing of your used cartridge.

It is very likely that the fuser film is worn, also check the transfer roller may be dry

I recommend that you check the PCR roller of the cartridge when it is damaged, it can affect the cleaning of the image cylinder and it can give you the fault you mentioned, in addition to the spots that you see in your image I have corrected them by changing the PCR.

Hi everyone. Finally I could dedicate a little time to the printer that had a little abandoned. And the solution was the simplest ..... change the cartridge! Choose to buy a Chinese alternative and not a remanufactured one. Of course, first check the film and the pressure roller but both were in good condition. The problem is solved, I end the issue. Thank you so much everyone