✅ reprogram eeprom printer canon mg3510

sinbandera

65

hace 5 años

Hello friends: The printer in question tried to reset it with the Service Tool and it was locked. It is no longer possible to enter the service mode, when you try to do so that you immediately begin to alternately flicker the lease and lock LEDs. The only solution would be to reprogram the eeprom. Do you know if there is any way to do it or are you already unsubscribed? Thanks for your suggestions.

Comentar



xerickxizackx

2.657

hace 5 años



hace 5 años

you need the bin files of this machine and nobody has it alone and seen in the free market and you get the same as buying the meinboard separately you need a reprogrammer to work and many times what you get the eprom burns and it no longer works mekjor give of low since you would have to see how the cartridges are in case they are already wearing a new machine better

Comentar

sinbandera

65

hace 5 años

Thanks friend for the answer. There is nothing left to change printer.



Responder

junior2015

61

hace 5 años

of these printers there are 2 models !! an old version and another that is a modern version! you have to be careful ... since your machine can be turned off .. always fix the chip or IC301, example Samsung chip is old model, the hynix is modern

Comentar

mastertecnicopc

9

hace 5 años

hello friend this file. bin of mg3510 is with 3,000 impressions and the service tool has been blocked, but it still has half as many impressions. link: https://mega.nz/#!Xo1ElLjC!5ALfgSAnRpS74s7Uj580IGx2B3tyjmsTbn5UHZ8e180

Comentar

reprogram eeprom printer canon mg3510

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

Curso Reparación de Equipos de Audio de Alta Fidelidad

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos